| Session 16: Gasification Process Modeling - Roundtable |
|---|
A novel technique to characterize inhomogeneous fuels for use in fluidized bed combustors and gasifiers
|
| View abstract | Mr. Arij van Berkel | Netherlands |
|
Two trial models for the rate of combustion and gasification of slurries or liquid biomass sprayed on inert fluidized particles
|
| View abstract | Prof. Marcio L. de Souza-Santos | Brazil |
|
The investigation of gasification-pyrolysis of biomass in a circulating fluidized bed
|
| View abstract | Dr. Guanyi Chen | Netherlands |
|
Preliminary improvements in the radiative heat transfer modeling for fluidized bed biomass gasification: bed section
|
| View abstract | Prof. José Rabi | Brazil |
|
Optimization study of fluidized-bed sugar-cane bagasse gasification varying air-ratio, bed diameter, and operational pressure
|
| View abstract | Mr. Igor Pusch | Brazil |
|
Thermal conductivities of rice hull and ash combinations and its use as insulator for a gasifier reactor
|
| View abstract | Mr. Rizaldo Aldas | USA |
|
The influence of reactor geometry and scale on the hydrodynamics of fluidised bed fast pyrolysis reactors
|
| View abstract | Prof. Tony Bridgwater | United Kingdom |
|
Modeling a CFB biomass gasifier. Part III: Kinetic equations for the selected reacting network
|
| View abstract | Prof. José Corella | Spain |
|
Rice husk, straw and bark behaviour during combustion, pyrolysis and gasification: Fundamental study
|
| View abstract | Dr. Sylvain Salvador | France |
|
Bioenergy and Biobased Products: Technologies, Markets, and PoliciesOrganized By: |
